Tuning fork level switch is a kind of new control switch, which is
mainly depend on the tuning fork
through the vibration principle to measure the level of material.
Through the installation of the tuning
fork on the base of the tuning fork vibration of a piezoelectric crystal in the
resonance frequency.
When the tuning fork and the medium contact, tuning fork
frequency and amplitude changes,
these changes are detected by the intelligent circuit, and convert
it into a switch signal.
Specifications:
Medium | Liquid |
Accuracy | ±2 mm |
Repeatability | ±2 mm |
Measuring Range | 40~1000mm |
Temperature Range | -40~180℃ |
Pressure Range | -100kPa~3MPa |
Power Supply | 24VDC |
Rate | 1W |
Output Signal | DPDT/PNP/NPN |
Material: | |
Enclosure | SS04 |
Sensor | SS316L |
Process connection | SS304 |
Electrical Connection | Hesman connector |
Ingress Protection Rating | IP67 |
Weight(standard) | 0.5kg |
Size and Installation:
Wire Diagram
Order Sheet:
| ||||||||
Type | A | Normal type | ||||||
B | High temperature type | |||||||
C | Sanitary type | |||||||
Insertion Length | 01 | 45mm/100mm | ||||||
02 | 100~3000mm | |||||||
Power supply | D | 24VDC only | ||||||
Fork Material | 1 | SS304 | ||||||
2 | SS316 | |||||||
3 | Others | |||||||
Process Connection | G | G1/2” 3/4” or 1” thread | ||||||
N | 1/2” 3/4” 1” NPT thread | |||||||
F | Flange | |||||||
T | Tri-clamp | |||||||
Explore Proof | D | ExdIICT6 | ||||||
N | Without | |||||||
Previous: No more
Next: Tuning Fork Level Switch
